Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
Box contents
-
Conga Rockstar 880 X-Treme ErgoFlex vacuum cleaner
-
Wall bracket
-
Flexible tube
-
Jalisco brush
-
Accessory for corners
-
Accessory for furniture
-
Accessory for upholstery
3. PRODUCT ASSEMBLY
Vacuuming tube and brush head assembly. Fig. 3
-
To install the brush head into the vacuuming tube, match both parts ensuring the tab on
the floor brush matches the guides on the tube, and introduce the tube into the brush head
until they are firmly fixed.
-
To disassemble them, press the brush head release button and pull from the vacuuming
tube while you hold the brush head.
Warning
When assembling these two parts, make sure the handle and the brush head are facing the
same direction.
-
Use the flexible tube to reach and vacuum dirt from the most inaccessible zones.
-
Press the flexible button to bend the tube.
Vacuuming tube, brush head and main body assembly. Fig. 4
To complete the installation of the device, hold the vacuuming tube with the brush head
assembled upright and introduce the tube in the main body.
Assembly of the main body and battery. Fig. 5
-
To assemble the battery, insert it in the hole in the end of the main body.
-
To disassemble the battery, press the battery release button and pull outwards to remove
it.
Dust tank assembly. Fig. 6
-
To make the dust tank assembly and disassembly easier, we recommend you separate first
the main body from the vacuuming tube.
-
Hold the dust tank firmly and pull the dust tank release trigger. Then, you will be able to pull
the dust tank outwards to separate both parts.
46
4. OPERATION
You can use this vacuum cleaner in two different manners:
-
Handheld vacuum cleaner, attaching the accessories directly to the main body.
-
Upright vacuum cleaner, using the vacuuming tube with the accessories assembled.
Handheld vacuum cleaner
-
Press the on/off and power switch to turn it on.
-
To set the power level, press the setting button.
-
It will automatically operate in Auto mode. The power level can be adjusted at any moment
by pressing the mode selection button.
-
Press the mode selection button to change the modes AUTO, MAX and ECO.
Upright vacuum cleaner
-
Assemble the vacuuming tube and accessories you want to use as indicated in the
assembly section.
-
Press the on/off and power switch to turn it on.
-
To set the power level, press the setting button.
-
It will automatically operate in Auto mode. The power level can be adjusted at any moment
by pressing the mode selection button.
-
Press the mode selection button to change the modes AUTO, MAX and ECO.
Accessories
This device includes different accessories that allow cleaning different types of surfaces,
objects and dirt. Some of them are suitable for the upright vacuum cleaner, and others are
preferably used with the handheld one.
Jalisco brush:
-
Assemble this brush to the upright vacuum cleaner. Jalisco brush is especially designed
to clean hard floors but can be used efficiently to clean any type of surface, such as soft
floors.
-
The brush counts on a protection system that avoids tangles and prevents the device from
being damaged. The brush stops rotating and the device stops operating automatically
when it vacuums big objects or excessive dirt.
Accessory for corners:
This accessory has been specifically designed to clean corners, door frames and windows, etc.
You can use them with the handheld or upright vacuum cleaner.
Accessory for furniture:
This accessory is used with the handheld or upright vacuum cleaner, attached previously
ENGLISH
CONGA ROCKSTAR 880 X-TREME ERGOFLEX
47
Werbung
