cecotec CONGA ANIMAL Bedienungsanleitung Seite 44

ENGLISH
4. Spot cleaning
5. Room cleaning
6. Mode and time display
7. Automatic charge
8. Scheduling
9. Edge cleaning
10. Power levels
11. Start/Pause
Remote control functions
Visualización de modo y hora/tiempo
Automatic cleaning mode
When pressing the button, it will appear "AUTO" on the display and the robot will start the
automatic cleaning.
Automatic charge mode
When pressing the button, the robot will return to the charging base automatically and it will
show on the display.
Direction buttons
Forward/+
- Press this button to increase the number in the programming mode or time settings.
- Hold down this button in the Standby mode to move the robot forward. The robot will stop
moving forward and return to Standby mode when you release the button.
Backward/-
- Press this button to decrease the number in the programming mode or time settings.
- Hold down this button in the Standby mode to move the robot backward. The robot will
stop moving backward and return to Standby mode when you release the button.
- Press this button during the cleaning process to change the robot direction.
Left
- Press this button to change the selected element from minutes to hours in the programming
mode or time settings.
- Hold down this button in the Standby mode to move the robot to the left. The robot will
stop spinning and return to Standby mode when you release the button.
- Press this button during the cleaning process for the robot to turn left.
Right
- Press this button to change the selected element from minutes to hours in the programming
mode or time settings.
CONGA ANIMAL
44