cecotec CONGA 7490 ULTIMATE HOME GENESIS Bedienungsanleitung Seite 60

ENGLISH
2. Insert the mixed tank into the robot vacuum cleaner and select the cleaning mode and
scrubbing level in the application: off, low, medium, or high.
3. Once you have selected the desired scrubbing level, the robot vacuum cleaner will start the
All in One function to vacuum, scrub, and sweep simultaneously thanks to its mixed tank.
Note:
- If you wish to mop, do not fill the water tank.
- To ensure a perfect scrubbing from the start, it is suggested to dampen the mop evenly
with water before fixing it to the mixed tank. It is also recommended to wash the mop after
every use.
- It is recommended to be present when the robot vacuum cleaner is scrubbing.
- When the robot vacuum cleaner returns to the self-emptying base, the mop must be
removed. Do not leave the robot vacuum cleaner charging with the mop assembled.
Manual mode
The robot vacuum cleaner can be moved manually by selecting manual mode in the application
and using the arrow keys.
Back Home mode
Press the Back Home button on the robot vacuum cleaner or from the app to send the robot
to the self-emptying base during any cleaning mode. The robot vacuum cleaner will stop
vacuuming until it reaches the base.
Smart Area mode
- Once the house map has been saved, select this mode to clean a predefined area. Cleaning
will be carried out in Edge mode first, then in zigzag movements. The robot vacuum cleaner
will clean the selected area and then return directly to the self-emptying base without
vacuuming.
- To activate this mode, select the Smart Area option on the app.
Room Mode
- Once the map of the house has been saved, select this mode for the robot to clean specific
rooms. Cleaning will be carried out in Edge mode first, then in zigzag movements. Once
done cleaning the selected rooms, the robot vacuum cleaner will directly return to the self-
emptying base without vacuuming.
- You can create a cleaning plan tailored to each room and adjust the following parameters:
cleaning mode, suction power, and scrubbing level.
- To activate this mode, select the Room cleaning option on the app.
Spot mode
- Select this mode to clean a specific area of the map around the marked point. The robot
60