Operation - cecotec CONGA 7490 ULTIMATE HOME GENESIS Bedienungsanleitung

ENGLISH
disposal bag. After cleaning, the robot will automatically return to the self-emptying
base to recharge. The self-emptying base will empty the dirt tank based on the emptying
scheduled selected on the app.
If the robot vacuum cleaner is charging in the self-emptying base, you can force the robot
-
to self-empty. To do so, select the forced self-emptying option in the app.

3. OPERATION

Robot vacuum cleaner's buttons
Auto Mode
- Press the Start/Pause button on the robot vacuum cleaner or select it in the app to make it
start cleaning automatically in Edge mode and then perform a cleaning cycle in an orderly
zigzag pattern while it also recognises which areas have been cleaned and which have
not. The robot vacuum cleaner will automatically plan the cleaning route during cleaning.
- If you control the robot vacuum cleaner manually during this mode, the robot will
recalculate the route, so it may pass through already cleaned areas. To ensure efficient
cleaning, do not operate the robot vacuum cleaner manually during automatic cleaning.
- During cleaning, the robot vacuum cleaner will stop briefly to evaluate the area and
calculate the cleaning route (this stop will vary depending on the house conditions).
- Thanks to the Total Surface 2.0 technology, if the battery is low during the cleaning cycle,
the robot vacuum cleaner will smartly and automatically return to the self-emptying base
and, once fully charged, resume cleaning from where it left off.
Back Home mode
- Press the Back Home button on the robot vacuum cleaner or from the app to send the robot
vacuum cleaner to the self-emptying base. The robot vacuum cleaner will stop vacuuming
until it reaches the base.
- This mode can be activated during any cleaning cycle.
- The robot vacuum cleaner will take the shortest route back to the self-emptying base
thanks to its map-memorisation feature and the smart Back Home function.
- Upon completing a cleaning cycle or when the battery is low, thanks to its TotalSurface 2.0
technology, the robot vacuum cleaner will automatically return to the self-emptying base
to avoid running out of battery. Once the robot has recharged, it will resume cleaning from
the point it has stopped.
Note
The robot vacuum cleaner will not be able to return to the self-emptying base if it can't easily
access it. If this happens, manually place it in the self-emptying base.
58