Blaupunkt 5CD891SC0 Bedienungsanleitung Seite 41

b. The temperatures of the refrigerator/freezer compartment / adjustable zone will be
displayed separately while the temperature of each zone is set.
2.1 Display
2.1.1 The operating panel will be illuminated for 2 minutes as soon as the door of the
refrigerator compartment or freezer is opened. (a door signal is detected in each case)
2.1.2 The operating panel will be illuminated each time a button is pushed, and the light will
go out 2 minutes after the last operation.
2.1.3 Display during normal operation
Temperature display for the refrigerator compartment: Shows the temperature for the current
setting.
Temperature display for the freezer compartment: Shows the temperature for the current
setting.
Temperature for the adjustable zone: Shows the temperature for the current setting.
3. DISPLAY OF BUTTONS
3.1 Temperature regulation for the refrigerator compartment
a. Temperature regulation for the refrigerator compartment:
This button can be used both in the user-defined mode and in Super mode. This button will flash
after the temperature regulation for the refrigerator compartment is entered. If you touch the button
multiple times, the temperature will change in a loop from "2 °C, 3 °C, 4 °C, 5 °C, 6 °C, 7 °C, 8 °C, –
–(off)". Then, it will flash for 5 seconds to indicate that the temperature selection is completed.
b. Switching off the refrigerator compartment:
Press the "Temperature regulation for the refrigerator compartment" button, then select "– –". It will
flash for 5 seconds to indicate that the temperature was selected, meaning that the refrigerator
compartment will no longer be cooled.
3.2 Temperature regulation of the freezer compartment
Temperature regulation of the freezer compartment:
This button can be used both in the user-defined mode and in vacation mode. This button will
flash after the temperature regulation for the freezer is entered. If you touch the button
multiple times, the temperature will change in a loop from "–14 °C, –15 °C, –16 °C, –17 °C, –
18 °C, –19 °C, –20 °C, –22 °C". Then, it will flash for 5 seconds to indicate that the
temperature selection is completed.
14