Denzel DS-4516 Benutzeranleitung Seite 6

GASOLINE CHAIN SAW
6
ON/STOP switch. The ON/STOP switch should be used to stop the engine.
A degree of noise from the machine is not avoidable. Route noisy work is to be licensed and limits for certain
periods. Keep rest periods and they may need to restrict the working hours to a minimum. For their personal
protection and protection of people working nearby, an appropriate hearing protection shall be worn.
WARNING: This machine produces an electromagnetic field during operation. Under some circumstances,
this field may interfere with active or passive medical implants. To reduce the risk of serious or fatal
injury, we recommend persons with medical implants to consult their physician and the medical implant
manufacturer before operating this machine.
– Do not operate a chain saw with one hand.
Serious injury to the operator, helpers, bystanders or any combination of these persons may result from
one-handed operation.
A chain saw is intended for two-handed use.
– Operate the chain saw only in a well-ventilated outdoor area.
– Do not operate saw from a ladder or in atree, unless you are specifically trained to do so.
– Make sure the chain will not make contact with any object while starting the engine.
Never try to start the saw when the guide bar is in a cut.
– Do not put pressure on the saw at the end of
the cut. Applying pressure can cause you to lose control when the cut is completed.
– Stop the engine before setting the saw down.
– Do not operate a chain saw that is damaged, improperly adjusted, or not completely and securely
assembled. Always replace bar, chain, hand guard, or chain brake immediately if it becomes damaged,
broken or is otherwise removed.
– With the engine stopped, hand carry the chain saw with the muffler away from your body, and the
guide bar and chain to the rear, preferably covered with a scabbard.
S Secure the machine during transport.
Do not touch the rotating parts of the device, this can cause various injuries! Do not use the product
without the protective elements provided for design. Keep hands, feet, clothing edges, jewellery at a safe
distance from the rotating parts of the device. Before each starting, make sure all bolts and nuts are tight.
Keep the cable away from heat, oil, sharp edges or moving parts. Use personal protective equipment:
safety glasses, hard hat, ear plugs and gloves, special shoes, tight-fitting clothing.
Wear protective gear. Always use steel-toed safety footwear with non-slip soles; snug-fitting clothing;
heavy-duty, non-slip gloves; eye protection such as non-fogging, vented goggles or face screen;
an approved safety
hard hat; and sound barriers (ear plugs or mufflers) to protect your hearing. Secure hair above shoulder
length.
– Always use approved hearing protection.
Regular users should have hearing checked regularly as chain saw noise can damage hearing. Long--
term exposure to noise can result in permanent hearing impairment.
– Keep all parts of your body away from the chain when the engine is running.
– Keep children, bystanders, and animals a minimum of 10 meters away from the work area. Do not allow
other people or animals to be near the chain saw when starting or operating the chain saw.
– Do not handle or operate a chain saw when you are fatigued, ill, or upset, or if you have taken alcohol,
drugs, or medication. You must be in good physical condition andmentally alert. Chain saw work
is strenuous. If you have any condition that might be aggravated by strenuous work, check with your
doctor before operating a chain saw.
– Carefully plan your sawing operation in advance. Do not start cutting until you have a clear work area,
secure footing, and, if you are felling trees, a planned retreat path.
Keep all parts of the body away from the saw chain when the chain saw is operating. Before You start
the chain saw, make sure the saw chain is not contacting anything. A momentt of inattention while
operating chain saws may cause entanglement of your clothing or body with the saw chain
Always hold the chain saw with your right hand on the rear handle and your left hand on the front
handle. Holding the chain saw with a reversed hand configuration increases the risk of personal injury