hanseatic MC-IF7042B2 Gebrauchsanleitung Seite 50

Page EN-18 Timer function
Setting the cooking time limit
5
0
1. Touch the cooking zone's slider sensor for
which you would like to use the cooking
time limit.
The heating level display begins to flash.
5.
0
2. Touch the timer sensor (10).
A flashing '10' will appear on the display.
A dot appears next to the cooking zone's
heating level display.
3. Select the desired cooking time setting
as described in the Section "Setting the
alarm time" see "Setting the alarm time"
on page EN-17).
The alarm time display begins to flash.
The alarm time display stops flashing after
a few seconds, but the dot behind the heat-
ing level display flashes.
--
10
(10)
Changing the cooking time limit
You can change a pre-set cooking time limit
at any time.
1. Touch the sensor of the cooking zone/
area for which you would like to change
the cooking time limit.
The heating level display for the selected
cooking zone flashes.
2. Touch the timer sensor (10).
The remaining minute number will flash
for a few seconds in addition to the timer
sensor. While the display is flashing, the
setting can be changed as described in
the Section "Changing the alarm time" see
"Changing the alarm time" on page EN-17).
Removing the cooking time limit
1. Touch the sensor of the cooking zone/
area for which you would like to change
the cooking time limit.
The heating level display for the selected
cooking zone flashes.
2. Touch the '+' and '-' sensors simultane-
ously.
'00' will appear on the display. The count-
down for the cooking time limit is then can-
celled.