Werbung
b.
Locate and remove the Tray 2 separation roller.
Call-out 1- Slide blue locking lever
Call-out 2- Remove the roller assembly.
c.
Remove the Tray 2 pick and feed rollers.
To remove the roller assembly, gently pull on the side of the assembly and slide out as shown.
NOTE:
Make sure hands are clean before touching the rollers. Oils or debris from hands can cause
paper pickup issues.
1
2
13.B2.D2 Fehler durch Papierstau in Fach 2
163
Werbung
