Werbung
5.
Make sure the tray 1 guides are set to the correct paper size and that the paper tray is not overfilled
(paper is below the 3 triangles on the right guide).
6.
Load the paper back into the tray and restart the print job.
7.
If the same jam appears remove and clean the tray 1 pick, feed and separation rollers.
a.
Locate and release the pickup roller assembly release tab.
Abbildung 9-13
156
Kapitel 9 Beheben von Problemen
Locate the pickup roller assembly tab
1
Werbung
