6.2 Internal Programs-Mode
In the Internal Programs-Mode, you can call up the internal programs.
Press the PROG SELECT-button - the D3-LED lites up yellow.
Push the Prog Select-channel-fader to the desired program. (See below, 6.7)
Push the Speed-channel-fader to the desired speed. (Void with static settings).
Push the Flash/Sensitivity-channel-fader to the desired Flash-Frequency. (In Sound Control Mode, this fader
serves as sensitivity adjustment).
6.3 Auto-Mode
In the Auto-Mode, you can call up the auto program as an endless loop.
Press the AUTO-button - the D4-LED lites up green.
Push the Speed-channel-fader to the desired speed.
Push the Flash/Sensitivity-channel-fader to the desired Flash-Frequency.
Schieben Sie den Flash/Sensitivity-Kanalfader auf die gewünschte Flash-Frequenz.
The Prog Select-channel-fader is void in this mode.
6.4 Sound Control-Mode
The sound-control works via the built-in microphone.
Press the SOUND ACTIVE-button - the D5-LED lites up red.
Push the Flash/Sensitivity-channel-fader to the desired sensitivity.
The Prog Select-channel-fader and the Speed-channel-fader are void in this mode.
6.5 Hold
Via this button, the Pause Function is set.
Press the HOLD-button - the D1-LED lites up red.
You can activate the Pause Function in any mode.
6.6 Blackout-Modus
Press the BLACKOUT-button and all devices will be set to Blackout-mode.
The D6-LED lites up yellow.
13/14
00041883.DOC, Version 1.1