Copying Scenes, Programs And Records; Sound-Control; Midi-Operation - EuroLite DMX OPERATOR Bedienungsanleitung

Press and hold the Bank Down-button and the Del-button while disconnecting the device from the mains.
Connect the device to the mains again.

6.4 Copying scenes, programs and records

With the Copy-function, you can make programming of programs and chasers easier by copying already
existent scenes into a program.
Copy a scene
Press and hold the Program-button and select the desired program via the Bank-buttons. Press the
respective Scene-button. Press the Add-button and select the desired bank where you want to copy the
scene to. Press the desired Scene-button.
Delete a scene
Press and hold the Program-button and select the desired program via the Bank-buttons. Press the
respective Scene-button. Press and hold the Del-button and press the desired Scene-button. The DMX-
value of this scene is set to 0.
Copy a program
Press and hold the Program-button and select the desired program via the Bank-buttons. Press the Add-
button and select the desired bank where you wish to copy the program to. Press the Bank Copy-button.
Delete a program
Press and hold the Program-button and select the desired program via the Bank-buttons. Press and hold the
Del-button and press the Bank Copy-button.
Delete all scenes
Caution: When you select this function, all programmed scenes will be irrevocably lost!
Press and hold the Program-button and the Bank Down-button while disconnecting the device from the
mains. Connect the device to the mains again.

6.5 Sound-control

You can activate the sound-control by pressing the Music-button (LED flashes). Please note that programs
and records are only active in this mode when the controller receives a music-signal. If there is no music
present, the program or chaser stops.

6.6 MIDI-operation

Press the MIDI-button and the third and fourth digit in the display start flashing. Select the respective MIDI-
channel via the Bank-buttons. Press the MIDI-button again in order to terminate the adjustment of the MIDI-
channels.
Overview on the MIDI-functions:
Bank Note-
number
00
01
02
03
Bank 1
04
05
06
07
08
09
Bank 2
10
...
Function
Scene 1
Scene 2
Scene 3
Scene 4
Scene 5
Scene 6
Scene 7
Scene 8
Scene 1
Scene 2
Scene 3
...
Bank Note-
number
Bank 15 112
Bank 15 113
Bank 15 114
Bank 15 115
Bank 15 116
Bank 15 117
Bank 15 118
Bank 15 119
Chase 120
Chase 121
Chase 122
Chase 123
Chase 124
Chase 125
Chase 126
19/36
Function
Scene 1
Scene 2
Scene 3
Scene 4
Scene 5
Scene 6
Scene 7
Scene 8
Chase 1
Chase 2
Chase 3
Chase 4
Chase 5
Chase 6
Blackout
00026741.DOC, Version 2.3