Internal Programs-Mode; Auto-Mode; Sound Control-Mode; Hold - EuroLite DMX LED Operator 2 Bedienungsanleitung

6.2 Internal Programs-Mode

In the Internal Programs-Mode, you can call up the internal programs.
Press the PROG SELECT-button - the LED lites up yellow.
Push the Prog Select-channel-fader to the desired program. (See below, 6.7)
Push the Speed-channel-fader to the desired speed. (Void with static settings).
Push the Flash/Sensitivity-channel-fader to the desired Flash-Frequency. (In Sound Control Mode, this fader
serves as sensitivity adjustment).

6.3 Auto-Mode

In the Auto-Mode, you can call up the auto program as an endless loop.
Press the AUTO-button - the LED lites up green.
Push the Speed-channel-fader to the desired speed.
Push the Flash/Sensitivity-channel-fader to the desired Flash-Frequency.
The Prog Select-channel-fader is void in this mode.

6.4 Sound Control-Mode

The sound-control works via the built-in microphone.
Press the SOUND ACTIVE-button - the LED lites up red.
Push the Flash/Sensitivity-channel-fader to the desired sensitivity.
The Prog Select-channel-fader and the Speed-channel-fader are void in this mode.

6.5 Hold

Via this button, the Pause Function is set.
Press the HOLD-button - the LED lites up red.
You can activate the Pause Function in any mode.

6.6 Blackout-Modus

Press the BLACKOUT-button and all devices will be set to Blackout-mode.
The Blackout LED lites up yellow.

6.7 Channel-fader Parameters in the Internal Programs-Mode

PROG SELECT Fader
0-9 R
9-17 G
18-26 B
27-35 A
36-44 RG
45-53 RB
54-62 RA
63-71 GB
72-80 GA
81-89 BA
90-98 RGB
99-107 RGA
108-116 RBA
117-125 GBA
126-134 RGBA
135-164 Color skip
165-194 Dreaming
195-224 Auto
225-255 Sound Control
DIMMER FLASH/SENSITIVITY Fader
Fader
Flash Frequency:
Master
4-255 (slow - fast)
Dimmer
Sound-Active Sensitivity
(insensitive – very sensitive)
14/15
0 -3 OFF
Program Speed
0 -7 OFF
8 - 255
SPEED Fader
void
0-255(slow -
fast)
void
00049013.DOC, Version 1.0