Lite Thermostat - Airzone EASYZONE AZCE6THINKRB Installationsanleitung

Think
Important: Use
ES
EN
FR
IT
PT
DE

LITE THERMOSTAT

Important: To configure a Lite thermostat you must move it away from its base. Once the microswitches are configured, put it back
in its original position.
Setting wireless device (only available for wireless thermostat)
- Open the radio channel. To do that, press on SW1. The LED D19 will remain solid red. Once
open, you have 15 minutes to make the association. If that period of time expires, start the
process over again. Remember not to open more than one module at the same time, it may
alter the process. You can also open the channel association radio through the Blueface and
Think (see section System parameters).
40
to confirm a nd to return.