Kärcher KM 130/300 R D Bedienungsanleitung Seite 8

Reverse drive
Danger
Risk of injury! While reversing, ensure that
there is nobody in the way, ask them to
move if somebody is around.
Caution
Risk of damage. Only use the direction
switch when the machine is standing still.
 Set the travel direction switch to "back-
wards".
 Press accelerator pedal down slowly.
You will find complete specifications in the
operating instructions.
5.964-136.0
Machine data
Drive speed, forward
Drive speed, reverse
Climbing capability (max.)
Usage duration when tank is full
Amount of oil
Operating speed
Dry run speed
Oil grades
Engine (above 25 °C)
Engine (0 to 25 °C)
Engine (below 0 °C)
Hydraulics
Tyres
Size, front
Air pressure, front
Size, rear
Working conditions
Temperature
Dimensions and weights
Length x width x height
Right turning radius
Left turning radius
Unladen weight
Permissible overall weight
Permissible front axle load
Permissible rear axle load
Capacity of fuel tank, diesel
8
Driving method
The accelerator pedal can be used to
–
vary the driving speed infinitely.
Avoid pressing the pedal suddenly as
–
this may damage the hydraulic system.
In the event of power loss on inclined
–
surfaces, slightly reduce the pressure
on the accelerator pedal.
Brakes
 Release the accelerator pedal, the ma-
chine brakes automatically and stops.
Note: The braking effect can be supported
by pressing the brake pedal.
Driving over obstacles
Driving over fixed obstacles which are 70
mm high or less:
 Drive forwards slowly and carefully.
Technical specifications
3
-
EN
Driving over fixed obstacles which are
more than 70 mm high:
 Only drive over these obstacles using a
suitable ramp.
Turn off the appliance
 Push the motor speed adjustment all
the way to the rear.
 Press brake pedal and keep it de-
pressed.
 Lock parking brake.
 Turn ignition key to "0" and remove it.
KM 130/300 R D
km/h 10
km/h 10
-- 18%
H 4
l 3,4
1/min 2500
1/min 1300
-- SAE 30, SAE 10W-30, SAE 15W-40
-- SAE 20, SAE 10W-30, SAE 10W-40
-- SAE 10W, SAE 10W-30, SAE 10W-40
-- HV 46
-- 15-4.5x8
bar 8
-- 15-4.5x8
°C -5 and +40
mm 2040x1330x1430
mm 1400
mm 1400
kg 951
kg 1512
kg 877
kg 635
l 16