Sony PWS-110NM1 Bedienungsanleitung Seite 21

7
Change the IP address and other settings.
8
Click the [Advanced] button to configure DNS,
WINS, and other settings.
9
When finished, click the [OK] button, then click the
[Close] button.
Setting the date and time
1
In [Settings] > [Time & Language], click [Date &
time].
2
Click [Add clocks for different time zones].
3
Select the [Date and Time] tab, click [Change date and
time...], and set the date and time.
4
Select the [Internet Time] tab and click the [Change
settings...] button.
5
Specify an NTP server, then click the [Update Now]
button.
6
Place a check mark in [Synchronize with an Internet
time server] to periodically correct the clock using the
NTP server.
7
When finished, click the [OK] button, then click the
[OK] button on the [Internet Time] tab.
Creating a new Windows user account
For security reasons, create a new "nm1user" general-user
account that does not have administrator privileges,
separate from the "nm1" default user account, to be used
for operating the unit. This section describes the procedure
for creating an "nm1user" account.
1
Right-click the file in the following folder, and select
[Run as administrator].
C:\Sony\LSM\tools\create-nm1user\create-
nm1user.cmd
The [User Account Control] screen appears.
2
Click the [Yes] button.
The Command Prompt screen appears.
3
Enter the password for the "nm1user" user, and press
the Enter key.
4
Re-enter the password for the "nm1user" user, and
press the Enter key.
The process for creating the user account begins.
When the process finishes, a "Press any key to
continue..." message appears.
5
Press the Enter key.
The Command Prompt screen closes. Subsequently,
you can sign in to Windows as the "nm1user" user.
Signing out
When finished, sign out from Windows.
1
Move the mouse cursor to the bottom left of the screen
and click [Start].
2
Click the account name, then click [Sign out].
Displaying the Web Application
You connect to the unit via the network from a client PC
and use the web application in a web browser on the client
PC to control and configure the unit.
Recommended client PC environment
CPU: Core i5 3 GHz or higher
Memory: 8 GB or higher
OS: Windows 8.1 64-bit
Windows 10 64-bit
Web browser: Operation with Google Chrome has been
verified. Update to the latest version, as required.
The browser window zoom factor should be set to
100%.
Display resolution: 1920 x 1080 pixels or higher is
recommended
Enter "https://(IP_address)" in the address bar of a web
browser on the computer (where IP_address is the address
specified in "Configuring the network") to display the
web application.
Enter the user name and password when the login screen
appears.
The following user name and password are configured by
default.
User name: admin
Password: nxladmin1
Changing the default administrator password
Change the "admin" user password using the following
procedure when logging in to the web application for the
first time as the "admin" user.
1
Log in to the web application.
The [License Agreement] screen appears.
21
Setting Up