Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Climatic classes
Look at chap. T
of your appliance. Your appliance can be operated in rooms with relevant
room temperatures as named below.
C
LIMATIC CLASS
SN
N
ST
T
3. Installation
All dimensions in these chapters are given in millimetres.
The minimum distances required for proper ventilation can be found in chapter
3.2.2 V
ENTILATION
3.1 Unpacking and positioning
WARNING! While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
1. Unpack the appliance carefully. Dispose of the packaging as described in chapter
waste management.
2. Remove all packaging materials.
3. The accessories of your appliance can be protected from damage due to
transportation (adhesive tapes etc.). Remove such tapes very carefully. Remove
remains of such tapes with a damp cloth using lukewarm water and a mild
detergent; see also chapter
components of the back of the appliance!
4. Install the appliance in a suitable position with an adequate distance from sources
of heat and cold.
5. If installation near a heat source is unavoidable, use a suitable insulation plate or
keep the following minimum distances to the heat source:
D
ECHNICAL
ATA
+10
+16
+16
+16
.
CLEANING AND MAINTENANCE
for information about the climatic class
A
MBIENT TEMPERATURE
→+32
C
0
0
0
→+32
0
C
→+38
C
0
0
0
→+43
0
C
~
~
69
e.g. unheated cellar
inner home temperature
inner home temperature
inner home temperature
. Never remove any
Werbung
