Pkm FD489NF WDIXK Bedienungsanleitung Seite 105

a) When removing the water tank, it is possible that the sealing ring (C) of the
water valve (B) is also pulled out of the door of the appliance. In this case, you
must replace the sealing ring. Proceed as follows.
b) Align the sealing ring (C) with the
appropriate opening (D) in the door of
the appliance.
c) Insert the sealing ring (C) into the
opening (D) properly again.
2. Now unscrew the water valve (B) of the
water tank (anticlockwise).
3. First, push the connector / flange of the
cover (E) of the water tank on one side
of the water tank upwards slightly and
carefully to separate the cover (E) of the
water tank from the water tank (A) itself.
Then repeat the procedure on the other
side of the water tank. Remove the cover
from the water tank.
4. Clean all parts (water tank, cover of the water tank, water valve) using hot soapy
water. Rinse well using clear water and dry all parts thoroughly.
5. It is recommended to clean the water dispenser, water tank, cover of the water
tank and water valve at least once per month in this way.
~ ~
105