Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
Fault
Light on, but motor
does not work
Light does not
work, motor does
not work
Oil leakage
Shake of the body
Insufficient suction
The machine
inclines
fi191220
Users- & Installation Instruction Cooker Hoods
16. Problem shooting Cooker hoods
Cause
The leaf blocked
The capacitor damaged
The motor jammed bearing
The internal with of motor off or a
bad smell from the motor
Beside the above mentioned, check the following:
Light damaged
Power cord looses
One way valve and
the air ventilation
entrance are not
tightly sealed
Leakage from the
connection of U-
shaped section and
cover
The leaf damaged
and causes shaking
The motor is not
tightly hanged
The body is not
tightly hanged
The distance
between the body
and the gas top too
long
Too much ventilation
from open doors or
windows
The fixing screw not
tight enough
The hanging screw
not tight enough
Get rid of the blocking
Replace capacitor
Replace motor
Replace motor
Replace lights
Connect the wires as per the electric
diagram
Take down the one way valve and
seal with glue
Take U-shaped section down and
seal with soap or paint
Replace the leaf
Lock the motor tightly
Fixed the body tightly
Readjust the distance
Choose a new place and resemble
the machine
Tighten the hanging screw and make
it horizontal
Tighten the hanging screw and make
it horizontal
10
GB
Solution
Werbung
