SFA Sanicondens Pro Bedienungs- & Installationsanleitung Seite 17

Connecting the discharge pipe
connection F 5.1
3.3 CONNECTING THE ALARM (Sanicondens® Pro)
Sanicondens® Pro
8
- ATTENTION : the connection of the detection system to the safety system of the connected appliance is
mandatory. The guarantee does not cover damage caused if the alarm is not connected.
3.4 MAINS CONNECTION
3.5 USE
Functional test
Before turning on the pump, make sure you remove the protective lock pin from the rear of the device. Fig. 4.
4 STANDARDS
INTERVENTIONS
5
5.1 MAINTENANCE
5.2 TROUBLESHOOTING
GUARANTEE
6
D.
Sanicondens® Pro
G
INSTRUCTIONS
Condensates inlet pipe blocked.
4
5
5.2
INSTRUCTIONS
7.
Sanicondens® Pro
6
17
C.
D.
5
10
9
8.
Action needed
EN