Silvercrest SBHS 50 A1 Bedienungsanleitung Seite 12

Styling – curling
For styling, the hair should be dry or slightly damp and free of styling products.
This does not apply to products that protect the hair from the effects of heat.
The appliance is heated up to the desired level and the hair is combed and free
of knots.
■ Twist the end of the strand around the styling brush
brush
around the styling brush
holding tip
■ Wait for 8–15 seconds (depending on the length and thickness of the hair).
■ Press the curl release button
the strand in a downwards direction. The styling brush
strand can be unrolled easily.
■ Proceed the same way with the other strands.
■ Once you are finished styling, turn the level switch
plug from the mains power socket.
Cleaning and care
RISK OF ELECTRIC SHOCK
► Before cleaning the appliance, always pull out the plug from the mains
power socket. There is a risk of electric shock!
WARNING! RISK OF INJURY!
► Allow the appliance to cool fully before cleaning it. Risk of burns!
CAUTION – PROPERTY DAMAGE!
► Do not use any aggressive, abrasive or chemical cleaning agents!
These could damage the upper surfaces of the appliance.
■ Remove any hair or lint from the bristles of the styling brush
fingers.
■ Clean the appliance only with a lightly moistened cloth.
■ Allow the appliance to dry completely before reuse or before putting it away.
SBHS 50 A1
upwards towards the hair roots so that the complete strand is rolled
. Ensure that you touch the appliance only on the
and the handle. The styling brush
and then roll the styling
gets very hot.
and simultaneously pull the appliance out of
turns so that the
to "0" and pull out the
with your
9 ■
GB
│