Küppersbusch IKE309-6-2T Benutzerinformation Seite 29

On the opposite side:
1. Install the lower pin.
2. Install the lower door.
3. Refit the pins (B) and the spacers (C) on
the middle hinge on the opposite side.
4. Install the upper door.
5. Tighten the spacer and tighten the upper
pin.
Ventilation requirements
The airflow behind the appliance must be
sufficient.
All manuals and user guides at all-guides.com
C
B
A
50 - min. 200 cm
Installing the appliance
Caution! Make sure that the mains
cable can move freely.
Do these steps.
1. Install the appliance in the niche.
Push the appliance in the direction of the
arrows (1) until the upper gap cover
stops against the kitchen furniture. Make
sure that the distance between the ap-
pliance and the cupboard front-edge is
44 mm.
Push the appliance in the direction of the
arrows (2) against the cupboard on the
opposite side of the hinge. Make sure
that the clearance between the appli-
ance and the cupboard is 4 mm.
2. Adjust the appliance in the niche.
The lower hinge cover (in the accesso-
ries bag) makes sure that the distance
2
min.
200 cm
2
2
1
29