Herunterladen Diese Seite drucken

Küppersbusch IKE309-6-2T Benutzerinformation Seite 22

Vorschau ausblenden Andere Handbücher für IKE309-6-2T:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

22
It is possible to de-activate the function at
any time by pressing Function button (refer
to "Functions Menu").
Fast Freeze Function
To freeze fresh foods, you will need to acti-
vate the Fast Freeze function.
Press Function button (several times if nec-
essary) until the corresponding icon appears.
This function stops automatically after 52
hours.
It is possible to deactivate the function at any
time by pressing Function button (refer to
"Functions Menu").
Excessive temperature alarm
An increase in the temperature in the freezer
compartment (for example due to a power
failure) is indicated by:
• flashing temperature
• freezer compartment flashing (Freezer
compartment indicator )
First use
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap
so as to remove the typical smell of a brand-
new product, then dry thoroughly.
Daily use
Freezing fresh food
The freezer compartment is suitable for
freezing fresh food and storing frozen and
deep-frozen food for a long time.
To freeze fresh food activate the Fast Freez-
ing function at least 24 hours before placing
the food to be frozen in the freezer compart-
ment.
Place the fresh food to be frozen in the bot-
tom compartment.
The maximum amount of food that can be
frozen in 24 hours is specified on the rating
plate, a label located on the inside of the
fridge.
The freezing process lasts 24 hours: during
this period do not add other food to be fro-
zen.
After 24 hours, when the freezing process is
completed, deactivate the Fast Freezing
function (see "Fast Freezing function").
All manuals and user guides at all-guides.com
• red illumination of display
• sounding of buzzer
• alarm symbol.
When normal conditions are restored:
• the acoustic signal shuts off
• the temperature value continues to flash
• the display illumination remains red.
When you press Function button / Alarm re-
set switch to deactivate the alarm, the high-
est temperature reached in the compartment
appears on indicator
At this point the flashing stops and the dis-
play illumination changes over from red to
white.
During the alarm phase, the buzzer can be
switched off by pressing Function button /
Alarm reset switch.
The illumination of the display remains red
until normal storage conditions are restored.
Important! Do not use detergents or abra-
sive powders, as these will damage the fin-
ish.
Storage of frozen food
When first starting-up or after a period out of
use, before putting the products in the com-
partment let the appliance run at least 2
hours.
Important! In the event of accidental
defrosting, for example due to a power
failure, if the power has been off for longer
than the value shown in the technical
characteristics chart under "rising time", the
defrosted food must be consumed quickly or
cooked immediately and then re-frozen (after
cooling).
Thawing
Deep-frozen or frozen food, prior to being
used, can be thawed in the refrigerator com-
partment or at room temperature, depending
on the time available for this operation.
for some seconds.

Werbung

loading