Küppersbusch IKE309-6-2T Benutzerinformation Seite 21

1. – The Fridge compartment indicator is
on.
– The display indicates the fridge tem-
perature.
2. – The Freezer compartment indicator is
11)
on.
– The display indicates the freezer tem-
perature.
In any case, after 10 seconds normal display
conditions are restored.
Functions menu
Each time Function button is pressed, the
following functions are activated in a clock-
wise direction:
• Fast Freeze function
• Shopping function
• Minidac function
• Performance Optimization function
• no symbol: normal operation.
Important! You can set one function ON at
a time.
To set the functions OFF, press the Function
button several times until no icon appears.
Temperature regulation
The temperature within the appliance is con-
trolled by the Temperature regulator situated
at the top of the appliance.
The temperature of the fridge compartment
may be regulated by rotating the Fridge tem-
perature regulator, and may vary between
more or less +2°C and +8°C.
The temperature of the freezer compartment
may be regulated by rotating the Freezer
temperature regulator, and may vary be-
tween more or less -15°C and -24°C.
By turning the Temperature regulator, the
display flashes and shows the desired tem-
perature.
For a correct storage of the food the following
temperatures should be set:
+5°C in the fridge
-18°C in the freezer.
After having set the desired temperature, if
the Temperature regulator is not rotated
within 5 seconds, the temperature of the
freezer compartment will be indicated.
To operate the appliance, proceed as fol-
lows:
11) In normal conditions.
All manuals and user guides at all-guides.com
• turn the Temperature regulator clockwise
to obtain the maximum coldness
• turn the Temperature regulator counter-
clockwise to obtain the minimum cold-
ness.
The intermediate position is usually the most
suitable.
However, the exact setting should be chosen
keeping in mind that the temperature inside
the appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
Performance optimization Function
The Performance optimization function is ac-
tivated by pressing Function button (several
times if necessary) until the corresponding
icon appears .
In this condition the chosen temperatures are
automatically set, in the best conditions for
storing food and therefore any possible op-
eration through the keys does not cause any
change as long as this function is activated.
It is possible to de-activate the function at
any time by pressing Function button (see
"Activation of functions" ) .
Shopping Function
If you need to insert a large amount of warm
food, for example after doing the grocery
shopping, we suggest activating the Shop-
ping function to chill the products more rap-
idly and to avoid warming the other food
which is already in the refrigerator.
The Shopping function is activated by press-
ing Function button (several times if neces-
sary) until the corresponding icon appears
.
The Shopping function shuts off automati-
cally after approximately 6 hours.
During the Shopping function also the fan in-
side the refrigerator compartment is auto-
matically activated.
Important! The fan inside the refrigerator
compartment is automatically activated also
when the room temperature is high (over
38°C), even though the Shopping function is
not activated.
21