Werbung
4 Driving instructions
4.1 Operation
Turn on/ off your scooter by pressing the start button for 2 seconds.
Turn on/ off the front light by pressing the start button only briefly.
Change gear by double press the start button.
You can change the speed unit to mph by three consecutive press the start button.
Before starting your journey, make sure that the handlebars click into place.
First, switch on your SO2 AIR 3rd Gen by pressing and holding the power button for 2 seconds. You start your SO2 AIR 3rd Gen by using one leg to accelerate yourself
and the device by pushing your foot off the ground (like a conventional scooter). Now you can accelerate by pulling the throttle on the right side of the handlebar.
You can operate the front disc brake and the electronic rear brake by using the brake lever on the left side of the handlebars. Shift your body weight slightly to the
rear to compensate for the braking effect of the brake. This allows safe and controlled braking. Always be careful when using the brake. Pull the brake lever firmly to
stop SO2 AIR 3rd Gen completely.
copyright by www.soflow.com
20
Werbung
