Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
8
Caution
-
Always return the machine to a service centre authorised by Philips for
examination or repair. Do not attempt to repair the machine yourself,
otherwise your guarantee becomes invalid.
-
Always put the machine on a flat and stable surface. Keep it in upright
position, also during transport.
-
Do not place the machine on a hotplate or directly next to a hot oven,
heater or similar source of heat.
-
Unplug the machine if problems occur during grinding or brewing and
before you clean it.
-
Let the machine cool down before inserting or removing any parts.
The heating element surface is subject to residual heat after use.
-
Descale the machine regularly.
-
If you do not clean and descale the machine, you run the risk that the
machine stops working and that your guarantee becomes invalid.
-
Never fill the water tank with warm, hot or sparkling water, as this may
cause damage to the water tank and the machine.
-
Do not use aggressive cleaning agents, solvents or chemicals to clean
the machine.
-
Do not keep the machine at temperatures below 0°C. Water left in
the heating system may freeze and cause damage.
-
This machine is intended for normal household use only. It is not
intended for use in environments such as staff kitchens of shops, offices,
farms or other work environments.
Electromagnetic fields (EMF)
This machine complies with all applicable standards and regulations
regarding exposure to electromagnetic fields.
Before first use
Installing the machine
1
Remove all packaging material from the machine.
2
Place the machine on a table or worktop away from the tap, the sink
and heat sources.
3
Leave at least 15cm of free space above, behind and on both sides of
the machine.
4
Insert the small plug into the socket located on the back of the
machine.
Werbung
