Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
12
Installing the Intenza+ water filter
We advise you to install the Intenza+ water filter as this prevents scale
build-up in your machine. You can buy the Intenza+ water filter separately.
For more details, see chapter 'Guarantee and support', section 'Ordering
maintenance products'.
1
Remove the small white filter from the water tank and store it in a
dry place.
Note: Please keep the small white filter for future use. You will need it for the
descaling process.
2
Remove the filter from its packaging and immerse it in cold water
with the opening pointing upwards. Press the sides of the filter gently
to let out the air bubbles.
3
Turn the knob of the filter to the setting that corresponds to the
water hardness of the area you live in.
A Soft water
B Hard water (default)
C Very hard water
Note: You can test the water hardness with a water hardness test strip.
4
Place the filter in the empty water tank. Press it down until it cannot
move any further.
5
Fill the water tank with fresh water up to the MAX indication and
slide it into the machine.
6
Let the machine brew a few coffees (see chapter 'Using the machine',
section 'Brewing coffee').
7
Refill the water tank with fresh water up to the MAX indication and
slide it back into the machine.
The on/off button lights up continuously.
,
The machine is ready for use.
Using the machine
To guarantee perfect coffee, the machine regularly rinses its inner circuit
with water. This automatic rinsing cycle takes place 15 minutes after the
appliance switches to standby mode or switches off. During the automatic
rinsing cycle, some of the water flows through the inner circuit directly into
the drip tray. Empty the drip tray regularly.
Werbung
