Fronius TPS-CMT Einbauanleitung Seite 5

Installation instructions for TPS-CMT installation set
General remarks
No guarantee or warranty claims can be made in respect of any improperly handled
electronic component or PCB.
Components The TPS-CMT (4,100,486) installation set consists of the following components:
Fig.1
Wichtig! The licence code for enabling the FS-CMT software is
-
-
WARNING! Operating the equipment incorrectly can cause serious injury and
damage. The following activities must only be carried out by trained and
qualified personnel! Take note of the safety rules in the power source operating
instructions.
WARNING! An electric shock can be fatal. Before opening the machine:
- Switch the power source mains switch to the „O" position
- Unplug power source from the mains
- Attach a clearly legible and easy-to-understand warning sign to prevent
anyone switching it on again
After opening the machine, discharge any electrically charged components
(e.g. capacitors).
NOTE! Observe ESD guidelines when handling electronic components and
PCBs. This primarily applies to ESD compatible
- packaging
- work surfaces
- floors
- seating
- earthing facilities
(1) (4)
TPS-CMT installation set
not included within the scope of delivery
to be ordered separately
(1) LHSB installation set
(2)
(2) CMT remote control panel
(3) Software tools CD
(4) Power source operating instructions
(3)
1