Transport; Maintenance And Care - capital sports Pacemaker X60 Bedienungsanleitung

Folding and Unfolding Treadmill
Folding
First, lift the back part of the frame board with your hand till you hear a light sound, which means the
folding system has been locked. Running board can't be turned to the opposite direction now.
Unfolding
Place the folded treadmill in a spacious area. Lift the back part of the frame board with your hand,then
click the spring to unfold the machine. Please stand back for more than 1.5 meters and release it, then
it will open automatically.

Transport

Carefully lift the treadmill at the rear roller area, grasping the two side end caps, and roll the treadmill
away.
Warning: In order to ufold the treadmill by yourself, you habe to be physically able to lift 20
kg easily. Otherwise seek help of another person to assist you, in order to avoid injuries.
Reasonable cleaning/lubricating should be made to extend the life time of this unit. Performance is
maximized when the belt and mat are kept as clean as possible. The mat/deck friction may play a major
role in the function and life of your treadmill and that is why we recommend you constantly lubricate this
friction point to prolong the useful life of your treadmill. Lubrication is provided with this unit.
WARNING: .The mat/deck friction may play a major role in the function and life of your
treadmill and that is why we recommend you constantly lubricate this friction point to
prolong the useful life of your treadmill. Failing to do this may void your warranty.
We recommend lubrication of the deck according to the following timetable :
- Light use (less that 3 hours per week) every 6 months
- Medium use (3-5 hours a week) every 3 months
- Heavy use (more than 5 hours per week) every 6-8 weeks
See below procedures for lubricating:
1. Switch off the device and unplug the cord.
2. Use a soft, dry cloth to wipe the area between the belt and deck.
3. Spread lubricant onto the inside surface of belt and deck evenly (make sure the machine is turned
off and power is disconnected).
4. Periodically lubricate the front and rear rollers to keep them at there peak performance. If the tread-
mill belt/deck/roller is kept reasonably clean it is possible to expect over 1200 hours.
44

Maintenance and Care