Setting The Clock - Seca 656 Bedienungsanleitung Und Garantieerklärung

Displaying time
After the scale has been switched on, time is displayed for about 2 seconds.
If a printer is connected, the time and date of the weighing operation is printed out in ad-
dition to the weight itself.
Depending on the country to which it is supplied, the display can be in either 24-hour
clock format (e.g. 19:45) or in 12-hour format (e.g. P 7:45).
If TIME appears in the display and 3 alarm signals are heard after the scale is switched
on, this means that the scale has been without a power supply for a prolonged period, so
the clock needs to be reset.

Setting the clock

– To reach setting mode, press the
FUNC key for about 2 seconds.
Use the arrow keys to select the TIME
menu item and then press the FUNC
key to reach the settings menu. The
year appears in the display.
– Use the arrow keys to set the correct
year.
– Press the FUNC key to confirm the year
information entered. This simultaneous-
ly switches you to the next value you
can set. Change this value too using the
arrow keys and confirm the entry using
the FUNC key.
Set all the values for the clock correctly
in the same way. The sequence of val-
ues is year, month, day, hour, minute.
On clocks with a 12-hour display, A ap-
pears on the left of the display for morn-
ing times and P for afternoon and
evening times.
– After you have confirmed the minutes
using the FUNC key, you exit the set-
tings menu automatically and the clock
continues to run at the time set.
If you also require seconds to be set accu-
rately, then proceed as follows:
– set a minute which is still to come, but
do not confirm it using the FUNC key.
As soon as the set minute starts, press
the FUNC key. At that point, the clock
will start running at 00 seconds and the
set minute.
Model 656 23
GB