Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
General
3
General
3.1
Authorized use
The internal cone grabber (KIG) is used exclusively for picking up symmetrical and asymmetrical shaft
cones.
It must be ensured that the gripping range and the load capacity of the device are not exceeded.
This device has been specially designed for heavy-duty use on a forklift truck or crane.
The setting process for fresh gripping goods (shaft cones) must be so far advanced that the gripping
goods to be picked up can withstand the required clamping forces of the device.
The device must not be used for lifting or pulling stuck shaft cones!
Lifting damaged shaft cones with the device is prohibited!
Only sufficiently set and crack-free shaft cones may be transported!
Otherwise there is a risk of the load or parts of the load falling!
Permissible gripping range: 625 – 800 mm (24½´´ – 31½´´)
Working load limit (WLL): 2000 kg (4400 lbs)
ATTENTION: The use of this device is only permitted in proximity to the ground (→ chapter
"Safety at work" and "Explanation of basic concepts").
57200020
8 / 17
GB
Werbung
Inhaltsverzeichnis
