Time Bands - Zodiac DF2 Montage- Und Gebrauchsanleitung

3.4.4 Activation/deactivation of "ECO Fan" mode
The "Eco Fan" mode is used to reduce the appliance's noise level and power consumption by lowering the ventilation
speed when the appliance has reached all setpoints.
When the "Eco Fan" mode is activated, the appliance's ventilation capacity deteriorates slightly.
To activate the "ECO Fan" mode:
• Press and hold (longer than 3 seconds) the
screen will appear the symbol
To deactivate the "ECO Fan" mode:
• Press and hold (longer than 3 seconds) the

3.4.5 Time bands

This feature is intended to further increase the energy savings of the appliance and promote energy efficiency of the
overall system.
This feature modifies the behaviour of other features of the appliance, but only while all the setpoints are achieved.
These features which behabiour can be modified are:
• Fan operation mode (see §3.3.1 "Configuring the ventilation mode" for reference).
• Pool cover mode (see §3.3.3 "Configuring pool cover mode" for reference).
Time bands feature defines a series of time bands for each day of the week (expressed as an activation time and a
deactivation time). Within every single timeband defined, exists an extra parameter that defines how the two previous
described features will behave:
Fan and pool cover features behaviour based on time band parameter
Time band parameter:
Fan operation mode:
Pool cover mode:
key, the screen shows "ECO FAN MODE ON" then, in the home
.
key, the screen shows "ECO FAN MODE OFF".
---
Unaffected Sniffing mode
Unaffected Unaffected
1 2
Sniffing mode
Pool cover=YES
EN
3
Always ON
Pool cover=YES
27