I User Functions; Switching The Appliance On And Off - Zodiac DF2 Montage- Und Gebrauchsanleitung

3.4 I User functions

3.4.1 Switching the appliance on and off

To switch the appliance on:
• Press and hold (longer than 3 seconds)
• The screen displays all of the symbols along with an audible beep. The value displayed on the screen corresponds
to the relative humidity (%). The ambient temperature can also be simultaneously displayed (°C). To do this, just set
the heating mode to "Electric" or "Water coil". (see §3.3.2 "Configuring the heating mode").
• The displayed values can change significantly when the ventilation is started with the intermittent
ventilation setting.
To switch the appliance off:
• Press and hold (longer than 3 seconds)
.
.
EN
25