TESTBOY TB 4000 Bedienungsanleitung Seite 16

Information
Please observe the five safety rules:
1
Disconnect
2
Secure against reactivation
3
Ensure isolation from the power supply (check that there is no voltage on both poles)
4
Earth and short-circuit
5
Cover adjacent live parts
Intended use
The instrument is only intended for use in the applications described in the operating instruc-
tions. Any other usage is forbidden and can result in accidents or destruction of the instrument.
Any such usage will immediately void all guarantee and warranty claims on the part of the op-
erator against the manufacturer.
Remove the batteries if the instrument is not in use for a long period of time;
this will protect the instrument against damage.
We shall not accept any liability for damage or injury resulting from improper
handling or non-compliance with the safety information. Any warranty claim will
be voided in such cases. An exclamation mark in a triangle indicates safety in-
formation in the operating instructions. Read all instructions through before
commissioning. This instrument is CE-approved and thus fulfils the required di-
rectives.
We reserve the right to alter specifications without prior notice © 2017 Testboy GmbH, Germany.
Disclaimer
The warranty claim is voided in cases of damage caused by failure to observe
the instructions! We shall not accept any liability for the resulting damage!
Testboy does not accept responsibility for damage resulting from
Failure to observe the operating instructions
|
Changes to the product that have not been approved by Testboy
|
Spare parts that have not been manufactured or approved by Testboy
|
The consumption of alcohol, narcotics or medicine
|
Correctness of the operating instructions
These operating instructions have been compiled with considerable care and attention. No
guarantee is given that the data, figures and drawings are complete or correct. Subject to
changes, printing mistakes and errors.
16
®
Testboy TB 4000