SoFlow SO3 2nd GEN Originalbetriebsanleitung Seite 10

12. Always keep both your feet on the SO3 2nd GEN/ SO3 PRO while riding, unless you're accelerating. Wait until you have come to a complete standstill before
you get off the SO3 2nd GEN/ SO3 PRO.
13. Before every ride, check that the handlebars are correctly engaged and the brake function. Never ride if the brakes do not work correctly. In this case contact
your SO3 2nd GEN/ SO3 PRO dealer immediately. You can operate the brake by pulling the left brake lever on the handlebar. This operation operates the front
disc brake and the electronic rear brake simultaneously. Be careful, the brake can become hot when used. Do not touch the brake when in use.
14. Do not use the SO3 2nd GEN/ SO3 PRO in temperatures below -5°C. This can have a negative effect on the battery and the engine. There is also an increased
risk of slipping at these temperatures due to ice formation.
15. Driving in rainy and snowy weather is not recommended. You should also avoid driving through puddles of water because the water could damage the engine
or the electricity. Note the extended braking distance on wet surfaces.
16. Always keep the device away from humidity, during usage as well as storage (see section 5 "Maintenance, repairs and warranty").
17. Check the battery level of the device before each journey. Never use the SO3 2nd GEN/ SO3 PRO when the battery level is low. If you need to turn off the SO3
2nd GEN/ SO3 PRO due to low battery power, do not use it for long periods of time like a conventional scooter as this may damage the engine in the long run.
18. Never operate any SO3 2nd GEN/ SO3 PRO while under the influence of drugs, alcohol, strong medication or other substances that can influence your level of
attention.
19. Remove all sharp edges resulting from use.
20. Plastic packaging should be kept away from children to prevent suffocation by external airway closure.
copyright by www.soflow.com
8