Process Data Info And Configuration - Balluff BES M18EH1-L01C80B-S04G-L04 Konfigurationsanleitung

BES M08EH1-L01C20B-S04G-L04 /BES M12E_1-L01C_0_-S04G-L04 /
BES M18EH1-L01C_ _ _-S04G-L04
Inductive sensors
6
System Functions (continued)
6.7

Process Data Info and Configuration

6.7.1 Description
Process data information and configuration offers various
possibilities related to process data:
– Selection of a process dataset specified by the device
– Information about the structure of the input and output
data
– Information about the last valid value for input and
output data
As a diagnosis function, monitoring of the updates of
certain process values is available. If these are not updated
in the specified time, the device sends corresponding
diagnosis messages.
Invalid Process Data
Input data (from the device to the master) is only marked
as invalid if the device has the Failure device status.
In the case of individual pieces of faulty data, the
data is not marked as invalid but is instead
replaced by substitution values or error codes.
This is to be taken into account during the
evaluation.
Invalid output data (from the master to the device) is not
processed by the device. The device then operates only
with the last valid data. A special behavior can, however,
be defined for various data.
6.7.2 ISDU
Name Index
Process Data Profile 0x0051 (81)
selection
Process Data Input 0x000E (14)
Descriptor
Process Data Output 0x000F (15)
Descriptor
Last Valid Process 0x0028 (40)
Data Inputs
Last Valid Process 0x0029 (41)
Data Outputs
Tab. 6-21: Process data info and configuration – ISDU
www.balluff.com
Subindex Access Length
0 R/W 1 byte
0 R = PD input
data length
0 R = PD output
data length
0 R LSSC: 1 byte
ADSS: 1 byte
CCM:
17 bytes
0 R CCM: 1 byte
Data Type Data
Storage
UINT8(ENUM) Yes LSSC: 0x1E (30)
ADSS: 0x1F (31)
CCM: 0x0F (15)
UINT8[] n/a
UINT8[] n/a
– n/a
– n/a
english
Default
–
–
–
–
91