Symbols Used; Function Check; Using The Product; Indication And Further Use - Petermann PM-5050 Gebrauchsanleitung

2.1 Symbols used

Observe the user manual
The distance between free transfer
surfaces using the Sliding Board must
not be more than 20 cm (10 cm in the
case of PM-5020/PM-5024/PM-5025).

2.2 Function check

Transfer products are also subject to a natural ageing process. Inspect the equipment regularly and carefully, in
particular before each use. Ensure that the product is in sound condition and that the material is not damaged.
Verify the function and stability of the product by bending the board carefully and ensure that the material is elastic,
yet firm and stable and withstands the load. The smooth surface of the special sliding material allows for easy sliding
and moving. Check these properties - ideally in comparison to a new product.
➢ Defective products may no longer be used!

3 Using the product

3.1 Indication and further use

Due to the wide range of possible applications, the indications cannot be tied to a specific clinical picture, since
flexible Sliding Boards are suitable for all applications involving people who require assistance.
Seated transfer with more supporting surface area and reduced friction.
➢
Maintaining independence with restricted mobility.
➢
Facilitates position changes with and without assistance.
➢
Reduction of shear and friction forces in case of an elevated risk of decubitus.
➢
Protection from injuries due to bed edges, wheelchair wheels or brake levers.
➢
Good adaptability thanks to the flexible material when height differences must be overcome.
➢
This product may be reused.
Before reusing the product, be sure to perform a thorough function check (see item 2.2) as well as cleaning or
disinfection of the product. (see item 5)
PM-50xx – 2022-07-2
Wipe off
Do not bleach
Do not tumble
Do not iron
Do not dry clean
Warning
13/38
max. load capacity see item 6
Manufacturer
Batch no. / lot no.
Identification code
Conformity mark
Item number
Medical device label