Safety Information; Symbols Used; Function Check - Petermann blue Motion BM-0560 Gebrauchsanleitung

2 Safety information

WARNING indicates a potential danger which could lead to personal injury or material damage.
It is the responsibility of the organisation / the user to determine, on the basis of the circumstances

(weight / health condition of the patient) and the capabilities of the user, whether several users may
be required for the transfer and/or whether additional safety measures are required.
Defective products may no longer be used.

The smooth surfaces significantly reduce resistance due to friction during repositioning. Check the

transfer surfaces carefully to ensure they are fixed in place securely (e.g. wheelchair, bed).
Ensure that the transfers are performed by the users in a back-friendly manner.

Weight limits must be observed (150 kg/330 lb).

After the transfer / repositioning, remove the sliding mat from under the patient. If applicable, ask

about products which can also be used for "bedding" applications.
Transfer products are subject to a natural ageing process. Inspect the equipment regularly to ensure

proper functionality.
The use of non-standard cleaning agents or bleaching agents, alcohols, fabric softeners or other

chemical laundry additives may lead to permanent deterioration of the sliding properties.
2.1

Symbols used

2.2 Function check

Transfer products are also subject to a natural ageing process. Inspect the equipment regularly and carefully, in
particular before each use. Ensure that the product is in sound condition and that the material and the seams are
not damaged. Check the product functionality and ensure that the material withstands the load. The smooth surface
of the special sliding material allows for easy sliding and moving. Check these properties - ideally in comparison to
a new product.
 Defective products may no longer be used!
60°C laundry
Do not bleach
Dry at low temperatures
Do not iron
Do not dry clean
Warning
Observe the user manual
14/37
max. load capacity see item 6
Manufacturer
Batch no. / lot no.
Identification code
Conformity mark
Item number
Medical device label