Search For An Ensemble; Settings In Memory; Analog Radio; Search For A Station - JVC KW-DB95BT Schnellstartanleitung

The "primary component" (main radio station) is sometimes accompanied
by a "secondary component" which can contain extra programs or other
information.
Preparation:
1
Connect a DAB antenna (commercially available) to the DAB antenna
jack. (Page 3)
2
Press DAB to select DAB source directly.
3
Press and hold DAB to start the Service List update.
"DAB SORTING" appears and update starts.
Updates take up to 3 minutes. No interruption (such as traffic
information) is possible during updates.
To cancel the Service List update: Press and hold DAB again.

Search for an ensemble

1
Press DAB to select DAB source directly.
2 Press S / T to search for an ensemble automatically.
(or)
Press and hold S / T until "M" flashes, then press repeatedly to
search for an ensemble manually.
Press S / T to select a service (either primary or secondary) to
3
listen to.

Settings in memory

You can store up to 18 services.
Store a service
While listening to a service....
Press and hold one of the number buttons (1 to 6).
(or)
1
Press and hold the volume knob until "PRESET MODE" flashes.
2
Turn the volume knob to select a preset number, then press the knob.
"MEMORY" appears once the service is stored.
6
Select a stored service
Press one of the number buttons (1 to 6).
(or)
1
Press .
2
Turn the volume knob to select a preset number, then press the knob.

Analog Radio

Search for a station

1 Press SOURCE B repeatedly to select FM or AM.
2 Press S / T to search for a station automatically.
(or)
Press and hold S / T until "M" flashes, then press repeatedly to
search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
(or)
1
Press and hold the volume knob until "PRESET MODE" flashes.
2
Turn the volume knob to select a preset number, then press the knob.
"MEMORY" appears once the station is stored.
Select a stored station
Press one of the number buttons (1 to 6).
(or)
1
Press .
2
Turn the volume knob to select a preset number, then press the knob.