Basic Operation; Turning The Transceiver On Or Off; Receiving And Transmitting; Call-Ring Operation - Icom IC-F29DR3 Basis Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

NOTE: Before using the transceiver for the first time, the

battery pack must be fully charged for optimum life and

operation. See the BATTERY CHARGING section.

z Rotate [VOL] to turn the transceiver ON or OFF.

Receiving:

Rotate [Rotary Selector] to select a channel.

2. When receiving a call, rotate [VOL] to adjust the audio

output level to a comfortable listening level.

Transmitting:

Wait until the channel is clear to avoid interference.

2. While holding down [PTT], speak at your normal voice

level.

3. Release [PTT] to receive.

To maximize the readability of your signal:

After pushing [PTT], pause briefly before you start

speaking.

2. Hold the microphone 5 to 10 cm from your mouth, then

speak at your normal voice level.

BASIC OPERATION

This function sends the preset ringer to your group members.

z Hold down [C-Ring]/[S-Ring/C-Ring]/[Call/C-Ring] for 1

second to send the preset ringer.

• The ringer may sound while holding down [C-Ring]/

[S-Ring/C-Ring]/[Call/C-Ring], depending on the setting.

• The same ringer sounds from your group members' speakers.

NOTE: To use this function, the operating channel and

CTCSS tone/Common ID must be the same on all of your

group's transceivers

Inhaltsverzeichnis