Changing Door Opening Side - Le Chai LMN480 Bedienungsanleitung

There appears to be a loud noise
The door does not close properly
The light (LED) does not come on
LED display error
The fans are not working

CHANGING DOOR OPENING SIDE

This appliance has reversible doors but is delivered with a right hinged door. The left hand hinge kit
comes with the unit (in the box), should you wish to reverse the hinge on your unit.
For your safety, please unplug appliance before doing this operation.
1. Lower hinge (Right)
4. Door
7. Top hinge (Left)
10. Door limit device
1. When open the door 90 degree, take out 2 screws (2) from lower door axis (3), remove the door (4),
then pull out the door and door axis (Fig. A).
2. Put the door (4) safety and take out the plug (12) from top of door frame, unscrew 1 screw (11) at
bottom and remove the Door limit device (10), then install the Door limit device (10) at top of door
frame, please use spare plug (12) to block the hole at top of door frame. (Fig. A/B)
3. Take out 3 hinge screws (6) from top hinge (right) (5) and remove it. (Fig. C)
4. Remove decorative nail (8) from left top of cabinet and install spare top hinge (Left) (7) at left top of
cabinet with 3 screws. (Fig. D)
• Check the device levelling
• Verify that a piece of paper or part of the
• Check the device levelling
• The seal is in poor repair
• The feet have "moved"
• The control panel is not working
• Printed circuit problem
• Mains plug problem
• Contact your Customer Care Service
• Poor display
• The temperature value is not shown
• Contact your Customer Care Service
• Control Panel to be replaced by your
2 . Screws
5. Top hinge (Right)
8. Decorative nail
11. Screw
packaging has not remained stuck in the
device.
Customer Care Service
3 .Door axis
6. Hinge Screws
9. Lower hinge (Left)
12. Plug
70