EuroLite LED KLS-800 TCL DMX KOMPAKT-LICHTSET Schnellstart Seite 2

Operation via DMX controller
For operation with a controller with DMX512 protocol, the light set is
equipped with 15 control channels.
Setting the DMX starting address and selecting the DMX operating
mode
1. To be able to operate the light set with a DMX controller, the DMX
starting address must be set for the first DMX channel. For this press
the button MENU so many times until
display. Then use the buttons UP and DOWN to set the address.
Note: The starting address depends upon which DMX controller is
being used. Please refer to its user manual.
2. To switch to the DMX operating mode, press the button MENU so
many times until the display indicates
the button UP. The display will indicate
the light set can be operated with the DMX controller.
DMX protocol
Channel 1, Preset programs, automatic mode, sound control
DMX value
000 – 009 Off
010 – 029 Program 1
030 – 049 Program 2
050 – 069 Program 3
070 – 089 Program 4
090 – 109 Program 5
110 – 129 Program 6
130 – 149 Program 7
150 – 169 Program 8
170 – 189 Program 9
190 – 209 Program 10
210 – 229 Program 11
230 – 249 Automatic mode
250 – 255 Sound control
Channel 2, Master control
DMX value
000 – 009 Off
010 - 255 Dimming from 0 – 100%
Channel 3, Strobe control
DMX value
000 – 009 Off
010 - 255
Strobe slow ® fast
Channel 4, Spot 1: Brightness red
DMX value
000 – 255 Dimming from 0 – 100%
Channel 5, Spot 1: Brightness green
DMX value
000 – 255 Dimming from 0 – 100%
Channel 6, Spot 1: Brightness blue
DMX value
000 – 255 Dimming from 0 – 100%
Channel 7, Spot 2: Brightness red
DMX value
000 – 255 Dimming from 0 – 100%
Channel 8, Spot 2: Brightness green
DMX value
000 – 255 Dimming from 0 – 100%
is indicated in the
or . Then press
and after a few seconds
Function
Function
Function
Function
Function
Function
Function
Function
Channel 9, Spot 2: Brightness blue
DMX value
000 – 255 Dimming from 0 – 100%
Channel 10, Spot 3: Brightness red
DMX value
000 – 255 Dimming from 0 – 100%
Channel 11, Spot 3: Brightness green
DMX value
000 – 255 Dimming from 0 – 100%
Channel 12, Spot 3: Brightness blue
DMX value
000 – 255 Dimming from 0 – 100%
Channel 13, Spot 4: Brightness red
DMX value
000 – 255 Dimming from 0 – 100%
Channel 14, Spot 4: Brightness green
DMX value
000 – 255 Dimming from 0 – 100%
Channel 15, Spot 4: Brightness blue
DMX value
000 – 255 Dimming from 0 – 100%
Operation with the DMX LED Operator 4
The control panel DMX LED Operator 4 available as accessory is
optimally adapted to the light set. It has four channels so that all spots of
the light set can be controlled in sync. To control the light set with the
DMX LED Operator 4 adjust the DMX starting address 021.
© Copyright Reproduction prohibited!
www.eurolite.de
Subject to change 30.07.2010
Function
Function
Function
Function
Function
Function
Function
0004464.DOC