A Fault Message Appears In The Display - Miele PDW 909 SOM Kurzgebrauchsanweisung

en - Problem solving guide

A fault message appears in the display

Problem
 Container empty
 Hygiene info: run a pro-
gramme of at least 60°C
 F - Water intake fault. If re-
start fails, call Service.
 Laundry not properly spun
 Machine is leaking
106
Cause and remedy
One of the external detergent containers is empty.
Refill the detergent container.

During the last wash, a wash programme with a temperat-
ure below 60 °C or the Drain/Spin programme was selec-
ted.
Start a programme with a minimum temperature of 60 °C

Clean machine
or the
The hot water supply is blocked or restricted.
Check whether the hot water stopcock has been prop-

erly opened.
Check whether the water inlet hose is kinked.

The selected spin speed was not reached during the final
spin due to excessive imbalance.
Check that the washing machine is level.

Start the spin cycle again.

The washing machine or drain valve is leaking.
Close the stopcock.

Contact the Miele Customer Service Department.

programme.