Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Once the grease filter is fully dry, insert it
with the pins into the openings (15).
6. Slide the lock back, press the grease fil-
ter (9) on top and release the lock. The
grease filter engages.
7. Fold the cover (7) down.
8. Switch the power back on.
Inserting/replacing activated
charcoal filters
Activated charcoal filters are required for
circulation air operation. They help combat
odours. They have to be replaced as soon
as the cooking odours can no longer be ade-
quately filtered.
If used frequently, you should change the fil-
ters regularly. Check them at least every 6
months.
For the source of supply, please see chapter
"„Our Service Centre" on page GB-20.
Care and maintenance
1. Unplug the mains plug or switch off the
corresponding circuit.
(9)
(
(15)
2. Fold the cover (7) up.
(7)
3. Slide the lock of the grease filter (9) side-
ways and carefully remove the grease
filter.
4. Only when replacing:
The two charcoal filters (16) are located to
the right and left of the motor (17).
Turn the two charcoal filters clockwise
and remove them.
Page GB-17
(7)
(9)
(17)
(16)
Werbung
Inhaltsverzeichnis
