Dispensing Water - Siemens KA90I Serie Gebrauchs- Und Montageanleitung

Dispensing water

Note
The water dispenser switches off after one minute and
the display panel briefly shows "ES". This means that
water can be drawn off for one minute.
1. Press the "water" button. The display panel shows
the "water" symbol.
2. Press a glass against the dispenser lever until the
glass is filled with the desired amount of water.
Tip
The temperature of the water corresponds with the set
fridge compartment temperature. If you prefer the water
to be colder, dispense some ice cubes into the glass
before drawing the water.
Dispensing ice
Only hold the container against the dispenser lever until
the container is half full of ice. Otherwise, the ice in the
ice-cube dispenser spout may cause the container to
overflow or block the ice cube dispenser spout.
If crushed ice was dispensed before dispensing ice
cubes, there may still be some crushed ice in the
dispenser spout. It will come out together with the first
few ice cubes.
1. Press the "crushed ice/cubes" button until the
display shows the "Ice cubes" or "Crushed ice"
symbol.
2. Press a suitable vessel against the dispenser lever
until it is filled with the desired amount of ice.
en
45