Fittings - Siemens KA90I Serie Gebrauchs- Und Montageanleitung

en
Switching off the ice-maker
If you do not expect to be using the ice-maker for
longer than 1 week (e.g. when going on holiday), the
ice-maker should be temporarily switched off to stop
the ice cubes freezing together.
1. Press and hold the "crushed ice/cubes" button for
3 seconds.
In the display, the symbols "Ice cubes", "Crushed ice"
and "Lock" flash for approx. 3 seconds.
Then the water dispensing is switched on and the
symbol "water" lights up.
Note
When the "crushed ice/cubes" button is pressed, when
the ice-maker is switched off, an alarm sounds and the
symbols "Ice cubes" , "Crushed ice" and "Lock" flash for
approx. 3 seconds.
2. Pull out the ice-cube container.
3. Empty the ice-cube container and clean it.
4. Push the ice-cube container all the way back on the
runners until it snaps into place.
Switching on the ice-maker
Press and hold the "crushed ice/cubes" button for
3 seconds.
An alarm sounds as soon as the ice-maker is switched
on.
46

Fittings

Glass shelves
The glass shelves can be removed and fitted at
different heights.
Removing
Lift the glass shelf at the back and pull it out.
Inserting
Slide the glass shelf backwards on the guide rails until
it snaps downwards into place.
Glass shelves over the drawers
The glass shelves can be removed.
Pull the shelf out and lift it upwards to remove it.
Door pockets
The door pockets can be removed.
Pull the door pockets upwards to remove.