Fitting The Doors - Siemens KA90I Serie Gebrauchs- Und Montageanleitung

en
Checking the water pipes for leaks
1. Plug the mains plug into the mains outlet socket.
2. Open the fridge compartment door.
3. Fill drinking water into the water tank.
4. Close the fridge compartment door.
5. Press the "water" button. The display panel shows
the "water" symbol.
6. Press a glass against the dispenser lever until water
exits.
7. Open the appliance doors.
8. Unscrew the 3 screws holding the base panel and
remove it.
36
9. Check the connections to the freezer compartment
door for leaks.
10.Put the base panel back in place and secure it with
the 3 screws.

Fitting the doors

If the appliance is too big to fit through the doors of
your home, the door handles or the appliance doors
can be unscrewed.
Note
The door handles or the appliance doors may only be
removed by an After-sales Service technician. Your
local After-sales Service centre will advise you of the
cost.