Spares And Accessories; Technical Specification - Cole Parmer essentials WB-300 Serie Bedienungsanleitung

the Service Department, quoting both the model
number and serial number:
E-mail: cpservice@antylia.com
Tel: +44 (0)1785 810475
Only spare parts supplied or specified by
Antylia Scientific or its agents should be used.
Fitting of non-approved parts may affect the
performance of the safety features designed
into the instrument. If in any doubt, please
contact the Service Department of Antylia Scientific
or the point of sale.
For any other technical enquiries, please contact
the Technical Support Department:
E-mail: cptechsupport@antylia.com
Tel: +44 (0)1785 810433.

Spares and Accessories

Description
Polycarbonate lid 6L bath
Polycarbonate lid 15L bath SWB15D/1
Polycarbonatel lid 24L bath SWB24D/1
Stainless steel lid 6L bath
Stainless steel lid 15L bath SWB15/1
Stainless steel lid 24L bath SWB24/1

Technical Specification

Nominal capacity
Temperature range
Temperature stability
Low water level control
Drain tap
Dimensions:
(internal)
Working depth max/min
Weight
Heater power
Electrical supply
IP rating
Note: Minimum set temperature on all models is 25ºC
4
Catalogue Number
SWB6D/1
SWB6/1
WB-300-6
6L
25ºC to 99.9ºC
+/-0.5ºC
Yes
Yes
w 335 (300)mm
d 230 (150)mm
h 280 (200)mm
160/80mm
6.5kg
350W
230V, 50Hz, 350W
31
WB-300-15
15L
25ºC to 99.9ºC
+/-0.5ºC
Yes
Yes
335 (300)mm
408 (325)mm
280 (200)mm
160/80mm
9.0kg
750W
230V, 50Hz, 750W
31
WB-300-24
24L
25ºC to 99.9ºC
+/-0.5ºC
Yes
Yes
335 (300)mm
584 (500)mm
280 (200)mm
160/80mm
12.8kg
1400W
230V, 50Hz, 1400W
31