Cleaning And Care; Servicing And Repair - Cole Parmer HP-200 Serie Bedienungsanleitung

Cleaning and Care

Before attempting cleaning disconnect from the
mains electricity supply and ensure that the top is
cool.
Periodically clean the body of the instrument
using a damp cloth and mild detergent solution.
Do not use harsh or abrasive cleaning agents.
Ceramic top models: The ceramic top is very
easy to keep clean. A damp cloth will normally
remove most types of contamination. For more
difficult stains a domestic cream cleanser is
recommended. Cleaning is made easier if
spillages are attended to promptly. In any case,
spillages of alkali, phosphoric acid and
hydrofluoric acid MUST be removed immediately
as these chemicals can attack and damage the
glass ceramic. Ensure that the appropriate safety
precautions are observed.
During cleaning and general operation take care
not to scratch the surface of the top plate as this
could result in subsequent thermal breakage.
WARNING: A ceramic top which is
scratched, chipped, chemically etched or
damaged must not be used.
Metal top models: The metal top plates should
be cleaned using a damp cloth and mild
detergent solution. Do not use harsh or abrasive
cleaning agents. Cleaning is made easier if
spillages are attended to promptly. In any case,
spillages of acids and alkalis MUST be removed
immediately as these chemicals can attack and
damage the aluminium alloy. Ensure that the
appropriate safety precautions are observed.
5

Servicing and Repair

This product range does not require any routine
servicing.
Note: There are no internal user
replaceable parts
In the event of product failure any repair or
replacement of parts should only be undertaken
by suitably qualified personnel. For advice please
contact the Service Department of Antylia
Scientific quoting model and serial number.
Only spare parts supplied or specified by Antylia
Scientific or its agents should be used. Fitting of
non-approved parts may affect the performance
of the safety features designed into the
instrument.
Note: The magnetic stirrer drive utilises
strong magnets.
If in any doubt, please contact the Service
Department of Antylia Scientific or the point of
sale.
Antylia Scientific Ltd.
Beacon Road,
Stone, Staffordshire,
ST15 0SA, United Kingdom
Tel: +44 (0)1785 810475
Email: cpservice@antylia.com
Web: www.coleparmer.com