Displaying The Results - ALPA LITEsurf Kurzanleitung

EN
6. Selecting automatic return after the measurement has
IT
been taken. Use
then press to confirm.
The following screen is displayed:
DE
Use to move to the required option, then press
ES
confirm. Then press
RU
In order to make sure that the tip of the feeler is in the correct
PL
position, from the main menu use
control screen by selecting the Posizione (Position) option
and pressing to confirm.
The following screen appears:
Then press to return to the main menu. After carrying out
all the operations, press
then press again to start measuring.

3.4 DISPLAYING THE RESULTS

The measurement results screen is displayed automatically
after each reading has been taken. If the results of a reading
have already been loaded into memory and you are on a
different screen, press
screen is displayed. If only one parameter has been enabled,
the following screen will be displayed:
8
to move to the Ritorno (Return) option,
to return to the main menu.
to move to the relative
to return to the home screen,
several times until the results
to
Figure 11. Set automatic return mode after measurement screen.
Figure 12. Feeler tip position display screen.
Figure 13. Screen displaying one parameter.