Taking Measurements - ALPA LITEsurf Kurzanleitung

EN

3.3 TAKING MEASUREMENTS

IT
To make sure that the measurement parameters are correct,
DE use to move from the main menu to the relative settings
screen by selecting the Set misura (Measurement set-up)
option and press
ES
The following screen appears:
RU
PL
1. Selecting the measurement standard. Use
the Norma (Standard) option and then press
The following screen is displayed:
Use to move to the required option, then press
confirm. It is also possible to select the unit of measure if you
select the ISO 4287 standard. In this case, use
to the required unit of measure and press
Then press to return to the main menu.
2. Selecting the cut-off length (ISO 4287).
Use to move to the L. cut-off option, then press
confirm.
The following screen is displayed:
Use to move to the required option, then press
confirm. The currently selected value is displayed in larger
characters compared to the other values.
Then press to return to the main menu.
6
to confirm.
to confirm.
to move to
to confirm.
to
to move
to
to
Figure 5. Set measurement parameters screen.
Figure 6. Set measurement standard screen.
Figure 7. Set length of cut-off screen.